Solis inverter monitoring on your wall, beside SolisCloud

RayHub is a solar display for your wall that reads your Solis hybrid over your home network and shows live solar, house, grid and battery power. There is no app to open and no account to make, and Solis is tested in our workshop.

Which Solis inverters RayHub reads

Solis hybrids with a battery are tested in our workshop.

Solis hybrids with a battery, tested in our workshop

These steps are for Solis hybrid inverters that run a battery, such as the S6-EH1P and S6-EH3P. RayHub is built and tested for them in our workshop. It has not run in a real home yet. If you have a Solis system and would like to help us test, email us at gday@rayhub.com.au.

Solis without a battery

Solis inverters without a battery work differently inside. These steps don't cover them yet. Not sure which you have? Email us your model at gday@rayhub.com.au and we'll tell you.

The logger stick

The logger stick plugged into your inverter decides whether RayHub can read through it. Some sticks, such as the S2-WL-ST, can share readings on your home network once Solis support has updated them. Others only talk to the Solis cloud app.

Your network connection

RayHub joins your home WiFi on 2.4 GHz, and your stick or adapter must be on that same home network. The finding the IP address steps are on the connect page.

What RayHub shows next to SolisCloud

SolisCloud is Solis's own monitoring app. RayHub sits beside it and reads your Solis over your home network.

Live power on your wall

RayHub shows what your solar, house, grid and battery are doing right now, so you can see it as you walk past. See how home solar flows in one diagram for how to read them.

Totals

RayHub shows today's solar, export and import totals when your inverter provides them.

No app, no account

RayHub reads your Solis inside your home. If your internet drops, the live numbers keep going. See what still works when your app is down.

It only reads

Nothing on your solar display changes how your Solis runs. Every reading comes from your inverter's own data, so accuracy follows your inverter.

Connect your Solis to RayHub

Your inverter shares its numbers over Modbus, a way for devices on your home network to read each other. For a Solis, the stick decides the route. For what Modbus is, see what is Modbus on a solar inverter.

We don't have confirmed menu steps for Solis yet. Fitting the adapter is a job for your installer.

The dependable route, an RS485 to WiFi adapter

Step 1

Ask your installer for an RS485 to WiFi adapter, such as the Elfin EW11, wired to the inverter's RS485 port.

Step 2

Have the adapter run in Modbus TCP mode on your home WiFi.

Step 3

Find the adapter's IP address, its number on your network, in your router's app. Finding the IP address has the steps.

Step 4

Give RayHub the adapter's IP address. No port number is needed.

Step 5

If nothing answers, ask your installer to check that the inverter's Modbus address is set to 1.

If you read through the logger stick instead

Step 1

Check with Solis support or your installer that your stick can share readings on your home network.

Step 2

Give RayHub the stick's IP address. No port number is needed.

Step 3

To keep the stick's address fixed on an S2-WL-ST, open the SolisCloud app, then Service, Local Debugging and Bluetooth. Then choose LAN Port Settings and Static IP.

A Solis logger stick allows one Modbus connection at a time. If another system already uses it, RayHub can't connect.

The same steps are on the connect page, with every other brand.

If RayHub does not find your Solis

Start with these checks.

A firmware update turned it off

Recent firmware updates for some Solis logger sticks turn off these local readings. The Solis app keeps working, so the change is easy to miss. An adapter is the dependable route.

Something else is connected

A Solis logger stick allows one Modbus connection at a time. If another system already uses it, RayHub can't connect.

The Modbus address

Ask your installer to check the inverter's Modbus address is set to 1.

The same home network

RayHub joins your home WiFi on 2.4 GHz, and your stick or adapter must be on that same home network.

Your model

Solis inverters without a battery aren't covered yet.

Still stuck

See when something looks wrong, or ask your solar installer.

Order your RayHub

See your Solis numbers as you walk past.

Orders are open, and we ship from December 2026. Order your RayHub.

RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See how to connect your inverter, Fronius monitoring, Sigenergy monitoring or what is RayHub.

Questions

Does RayHub work with Solis inverters?

It is tested in our workshop for Solis hybrids that run a battery, such as the S6-EH1P and S6-EH3P. They have not run in a real home yet. Solis inverters without a battery aren't covered yet.

Can I see my Solis without opening SolisCloud?

Yes. RayHub reads your Solis over your home network and shows your solar, house, grid and battery power live on your wall. There is no app to open and no account to make.

Can RayHub read through my Solis logger stick?

It depends on the stick and its firmware. Some, such as the S2-WL-ST, can share readings on your home network once Solis support has updated them. Others only talk to the Solis cloud app.

What if my logger stick stopped working with RayHub?

Recent firmware updates for some Solis logger sticks turn off these local readings. The Solis app keeps working, so it is easy to miss. An RS485 to WiFi adapter in Modbus TCP mode is the dependable route.

Why can RayHub not connect to my Solis stick?

A Solis logger stick allows one Modbus connection at a time. If another system already uses it, RayHub can't connect.

Can RayHub change my Solis settings?

No. RayHub only reads your inverter. Nothing on it changes how your Solis runs.