Fronius monitoring on your wall, beside Solar.web
RayHub is a solar display for your wall that reads your Fronius over your home WiFi and shows live solar, house and grid power. Solar.web keeps working as before. There is no app to open and no account to make. The Fronius Primo is verified in more than one real home.
Which Fronius inverters RayHub reads
The Primo is verified in real homes. The GEN24 models are tested in our workshop.
| Fronius Primo, verified in real homes | One home has a Fronius Primo with a Datamanager 2.0 card and a Fronius Smart Meter. Another has a Fronius Primo 5.0 with a Datamanager 2.0 card and no Smart Meter, and shows solar only. Most Primo inverters have the Datamanager 2.0 card built in, and your Primo needs it to connect. |
|---|---|
| Primo GEN24 and Symo GEN24 | These are tested in our workshop. They have not run in a real home yet. The steps below cover them. |
| A Fronius Smart Meter | A Fronius Smart Meter gives RayHub your grid and house figures. Without one, your solar display shows your solar only. The meter needs no setting. RayHub finds it. For how the meter fits in, see your smart meter and solar. |
| Your network connection | RayHub joins your home WiFi on 2.4 GHz, and your Fronius must be on that same home network. To find its IP address, open the inverter's web page or your internet router's app. The finding the IP address steps are on the connect page. |
The inverter turns your panels' DC into the AC your house uses, and it is where your solar numbers come from. Every reading comes from your inverter's own data, so what RayHub shows follows what your Fronius reports. See DC vs AC in your solar system.
What RayHub shows next to Solar.web
Solar.web is Fronius's own monitoring. RayHub sits beside it.
| Solar.web stays as it is | Switching on the Modbus settings doesn't change Solar.web. It keeps working as before. The settings only affect devices on your home network that read your inverter. |
|---|---|
| Live power on your wall | RayHub shows what your solar, house and grid are doing right now, so you can see it as you walk past. See how home solar flows in one diagram for how to read them. |
| Totals | RayHub shows today's solar, export and import totals when your inverter provides them. |
| No app, no account | RayHub talks to your inverter inside your home. If your internet drops, the live numbers keep going. See what still works when your app is down. For the other ways to watch a solar system, see the ways to monitor your solar system. |
| It only reads | Nothing on your solar display changes how your Fronius system runs. Every reading comes from your inverter's own data, so accuracy follows your inverter. |
Switch Modbus on for your Fronius
The setting is called Modbus. It is a way for your inverter to share its numbers with other devices on your home network. For what it is and why it is often off, see what is Modbus on a solar inverter.
Check this before you change anything. Both sets of steps change the SunSpec Model Type, which changes how your inverter lays out its readings. Anything else that already reads your inverter would then read the wrong numbers. That could be a battery system, a car charger or another monitor. If something else reads your inverter, ask your installer before you go ahead.
For a Primo or Symo with a Datamanager 2.0 card
| Step 1 | Open the Datamanager's web page in a browser. Type the inverter's IP address into the address bar. Your installer may need to log in for you. |
|---|---|
| Step 2 | Go to Settings, then Modbus. |
| Step 3 | Set Data export via Modbus to tcp. |
| Step 4 | Set the Modbus port to 502. |
| Step 5 | Set SunSpec Model Type to int + SF. The factory setting is float. RayHub can't read float. If it is left on float, your solar display tells you to change it. |
| Step 6 | Leave String control address offset as it is, and leave Demo mode switched off. |
| Step 7 | Save, then give RayHub the inverter's IP address. Your Fronius Smart Meter needs no setting. RayHub finds it. |
For a Primo GEN24 or Symo GEN24, tested in our workshop
| Step 1 | Open the inverter's web page in a browser. Type the inverter's IP address into the address bar. Your installer may need to log in for you. |
|---|---|
| Step 2 | Go to Communication, then Modbus. |
| Step 3 | Switch on the Modbus TCP server. |
| Step 4 | Set SunSpec Model Type to int + SF. The factory setting is float, which RayHub can't read. |
| Step 5 | Leave the meter address at 200, and leave Allow control switched off. RayHub only reads. It doesn't need control. |
| Step 6 | Save, then give RayHub the inverter's IP address. If the Modbus page shows a port other than 502, add it on the end. |
The same steps are on the connect page, with every other brand. If you would rather not do it yourself, ask your solar installer.
If RayHub does not find your Fronius
Start with these checks.
| The model type is still float | RayHub can't read float. If SunSpec Model Type is left on float, your solar display tells you to change it to int + SF. |
|---|---|
| Only solar shows | Grid and house figures come from a Fronius Smart Meter. Without one, your solar display shows your solar only. That is how it looks in the Primo 5.0 home we verified. |
| Something else reads your inverter | A battery system, a car charger or another monitor may already read your Fronius. The int + SF setting changes the numbers they see, so ask your installer before you change it. |
| The same home network | RayHub joins your home WiFi on 2.4 GHz, and your Fronius must be on that same home network, by WiFi or by cable. |
| A different port | If the Modbus page shows a port other than 502, add it to the end of the IP address you give RayHub. |
| Still stuck | See when something looks wrong, or ask your solar installer. |
Order your RayHub
See your Fronius numbers as you walk past.
Orders are open, and we ship from December 2026. Order your RayHub.
RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See how to connect your inverter, Sungrow monitoring, Sigenergy monitoring or what a home energy monitor shows.
Questions
| Does RayHub work with Fronius inverters? | Yes, with the Fronius Primo. RayHub is verified in more than one real home, each with a Primo and a Datamanager 2.0 card. The Primo GEN24 and Symo GEN24 are tested in our workshop and have not run in a real home yet. |
|---|---|
| Can I see my Fronius without opening Solar.web? | Yes. RayHub reads your Fronius inverter over your home WiFi and shows your solar, house and grid power live on your wall. There is no app to open and no account to make. You can keep using Solar.web as well. |
| Does switching on Modbus change Fronius Solar.web? | No. Solar.web keeps working as before. The Modbus settings only affect devices on your home network that read your inverter. |
| How do I switch Modbus on for my Fronius? | On a Primo or Symo with a Datamanager 2.0 card, open the Datamanager's web page, go to Settings, then Modbus, set Data export via Modbus to tcp, set the port to 502 and set SunSpec Model Type to int + SF. On a Primo GEN24 or Symo GEN24, go to Communication, then Modbus, switch on the Modbus TCP server and set SunSpec Model Type to int + SF. |
| Do I need a Fronius Smart Meter? | Only for grid and house figures. A Fronius Smart Meter gives RayHub your grid and house figures, and it needs no setting because RayHub finds it. Without one, your solar display shows your solar only. |
| What does SunSpec Model Type int + SF change? | It changes how your inverter lays out its readings. The factory setting is float, which RayHub can't read. Anything else that already reads your inverter would then read the wrong numbers, so if something else reads it, ask your installer first. |
| Can RayHub change my Fronius settings? | No. RayHub only reads your inverter. Nothing on it changes how your Fronius system runs. |