Sigenergy monitoring on your wall, beside mySigen
RayHub is a solar display for your wall. It reads your Sigenergy system over your home WiFi and shows what your solar, house, grid and battery are doing right now. Sigenergy is the first brand RayHub was verified with in a real home.
What your solar display shows
Four live numbers, in one place you can read from across the room.
-
Solar
What your panels are producing right now.
-
House
What your home is using right now.
-
Grid
What your home is taking from the grid or sending to it right now.
-
Battery
What your battery is doing right now. See solar with battery storage and how to read it, or home energy storage explained.
-
An older solar system beside your Sigenergy
If your Sigenergy meter sees your other inverter, your solar figure is the total of both. While your other inverter is producing, a small grey line under the solar figure shows its share, like "Other inverter 1.20 kW". If your other inverter isn't wired through your Sigenergy, nothing can see it, and your solar figure is your Sigenergy's alone. This works with Sigenergy today.
-
Your EV charger
Verified in a real home for the Sigenergy DC charger. Your display shows your car's charge level and how fast it is charging. You find the charger once from Settings after Modbus TCP is on. Session energy and the end-of-charge view are still being checked with owners.
Sigenergy is verified in a real home
Several other brands are built and tested in our workshop. Sigenergy, SolaX Hybrid Gen4, Sungrow, Fronius Primo, GoodWe hybrid and Victron are the ones that have run in a real home.
Verified means RayHub has run in a real home with that brand. Every reading comes from your inverter's own data, so what your solar display shows follows what your Sigenergy system reports.
You can see all thirteen brands on the connect page.
What has to be switched on
One setting in your Sigenergy system, called Modbus.
Modbus is a way for your inverter to share its numbers with other devices on your home network. It is often switched off when the inverter is installed. RayHub needs it switched on.
Your inverter and RayHub also need to be on the same home network. RayHub joins your home WiFi, so your inverter must be connected to that same network, by WiFi or by cable.
The steps for Sigenergy are on the connect page. You do them yourself in the mySigen app, and you don't need to be technical.
It only reads
RayHub only reads your inverter. Nothing on your solar display changes how your Sigenergy system runs. There is no account to make and no subscription to pay.
What RayHub shows next to mySigen
They do different jobs. You can keep using both.
The mySigen app is where you switch on Modbus for RayHub.
RayHub is for the glance. Your numbers are on your wall, so you can see them as you walk past, with no app to open. RayHub needs no app and no account.
If your internet drops, the live numbers on your solar display keep going.
Your Sigenergy app is one of a few ways to watch a solar system. For the others, see the ways to monitor your solar system.
Order your RayHub
Orders are open, and we ship from December 2026. Order your RayHub.
Setting up Modbus first? Start with the Sigenergy steps or read about connecting your inverter.