SolaX monitoring on your wall, beside SolaXCloud
RayHub is a solar display for your wall that reads your SolaX over your home WiFi and shows live solar, house, grid and battery power. There is no app to open and no account to make. SolaX Hybrid Gen4 is verified in a real home.
Which SolaX inverters RayHub reads
Gen4 is verified in a real home. Gen2 and Gen3 are tested in our workshop.
| SolaX Hybrid Gen4, verified | SolaX Hybrid Gen4, through the Pocket WiFi dongle, is tested and verified in a real home. An example is the X3-Hybrid G4. It includes the Qcells Q.VOLT, which is a Gen4 SolaX under another name. Gen4 has no network port of its own, so it connects through its Pocket WiFi 3.0 dongle. |
|---|---|
| X1 and X3 Hybrid Gen2 and Gen3 | These are tested in our workshop. They have not run in a real home yet. They have a network port built in, so you connect a cable and give RayHub the inverter's own address. |
| Pocket WiFi 2.0 and early Gen4 | The older USB style Pocket WiFi 2.0 doesn't share readings, and early Gen4 inverters with that socket can't take a 3.0. For those, the route is an RS485 to network adapter, covered below. |
| Newer SolaX models | Newer SolaX models aren't covered yet. |
Every reading comes from your inverter's own data, so what RayHub shows follows what your SolaX reports.
What RayHub shows next to SolaXCloud
SolaXCloud is SolaX's own monitoring app. RayHub sits beside it and reads your SolaX itself, on your home network.
| Live power on your wall | RayHub shows what your solar, house, grid and battery are doing right now, with no phone in your hand. See how home solar flows in one diagram for how to read it. |
|---|---|
| Totals | RayHub shows today's solar, export and import totals when your inverter provides them. |
| No app, no account | RayHub reads your SolaX inside your home. If your internet drops, the live numbers keep going. See what still works when your app is down, or the ways to monitor your solar system. |
| It only reads | Nothing on your solar display changes how your SolaX runs. Every reading comes from your inverter's own data, so accuracy follows your inverter. |
Connect your SolaX to RayHub
Modbus is a way for your inverter to share its numbers with other devices on your home network. Which route you use depends on your SolaX generation. For more on Modbus, see what is Modbus on a solar inverter.
We don't have confirmed menu steps for SolaX yet. What follows is what we know. Check which generation you have first, since the routes differ.
For SolaX Hybrid Gen4 with a Pocket WiFi 3.0 dongle, verified
| Step 1 | Check you have the Pocket WiFi 3.0, the newer black dongle, with firmware V3.004.03 or later. Older dongle firmware can't do this. If you aren't sure, ask your installer. |
|---|---|
| Step 2 | Make sure the dongle joins the same home WiFi as your solar display. A dongle on a different network, or one that is asleep, won't be found. |
| Step 3 | Find the dongle's IP address in your internet router's app. It is four numbers with dots. |
| Step 4 | Give RayHub the dongle's address. The dongle answers Modbus itself, on port 502, and RayHub uses 502 unless you say otherwise. |
| Step 5 | The dongle can go to sleep overnight and pick up a new address from your router. Ask your installer to set a DHCP reservation, or set a fixed address in the SolaXCloud app under Dongle, the settings icon, then Network configuration. |
For X1 and X3 Hybrid Gen2 and Gen3, tested in our workshop
| Step 1 | Connect the inverter's own network port to your home network with a cable. |
|---|---|
| Step 2 | Find the inverter's IP address in your internet router's app. |
| Step 3 | Give RayHub the inverter's IP address. No port number is needed. |
| Step 4 | Give RayHub the inverter's address, not the Pocket WiFi dongle's. Recent firmware updates for some of these dongles turn off the local readings RayHub uses. |
| Step 5 | If nothing answers, ask your installer to check the inverter's Modbus address. It is usually 1. |
For a Pocket WiFi 2.0, or an early Gen4 with the USB style dongle socket
| The route | Ask your installer to fit an RS485 to network adapter on the inverter's COM port, set to Modbus TCP mode. It is the same adapter as Deye / Sunsynk and Fox ESS. Give RayHub the adapter's address. |
|---|
The same notes are on the connect page, with every other brand.
If RayHub does not find your SolaX
Start with these checks.
| Old dongle firmware | On a Gen4, the Pocket WiFi 3.0 needs firmware V3.004.03 or later. Older dongle firmware can't share readings. |
|---|---|
| The wrong dongle | The older USB style Pocket WiFi 2.0 doesn't share readings. Early Gen4 inverters with that socket can't take a 3.0. The adapter route above is the way. |
| The wrong address | On a Gen4, give RayHub the dongle's address. On a Gen2 or Gen3, give RayHub the inverter's address, not the dongle's. |
| A sleeping dongle | A Gen4 dongle can sleep overnight and pick up a new address. Ask your installer to set a DHCP reservation so the address stays put. |
| The same home network | Your SolaX, or its dongle, and RayHub need to be on the same home network. |
| A newer model | Newer SolaX models aren't covered yet. |
| Still stuck | See when something looks wrong, or ask your solar installer. |
| Help us test | If you have a SolaX Gen2 or Gen3 system and would like to help us test, email us at gday@rayhub.com.au. |
Order your RayHub
See your SolaX numbers as you walk past.
Orders are open, and we ship from December 2026. Order your RayHub.
RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See how to connect your inverter, Fronius monitoring, Sigenergy monitoring or what a home energy monitor shows.
Questions
| Does RayHub work with SolaX? | Yes, with SolaX Hybrid Gen4. It is tested and verified in a real home, through the Pocket WiFi 3.0 dongle. SolaX X1 and X3 Hybrid Gen2 and Gen3 are tested in our workshop and have not run in a real home yet. |
|---|---|
| Which address do I give RayHub? | On a Gen4, the Pocket WiFi 3.0 dongle's address, because the dongle answers Modbus itself. On a Gen2 or Gen3, the inverter's own address, through its network port. |
| Do I need the Pocket WiFi dongle? | On SolaX Hybrid Gen4, yes. Gen4 inverters have no network port of their own, so RayHub reads through the Pocket WiFi 3.0 dongle, which needs dongle firmware V3.004.03 or later. Gen2 and Gen3 have a network port built in, so you connect a cable instead. |
| Is the Qcells Q.VOLT covered? | Yes. The Qcells Q.VOLT is a Gen4 SolaX under another name, and it connects through the Pocket WiFi dongle the same way. |
| What if I have a Pocket WiFi 2.0? | The older USB style Pocket WiFi 2.0 doesn't share readings. For a Gen4 with that dongle socket, the route is an RS485 to network adapter on the inverter's COM port, set to Modbus TCP mode. Ask your installer. |
| Are newer SolaX models covered? | Not yet. Newer SolaX models aren't covered. |
| Can RayHub change my SolaX settings? | No. RayHub only reads your inverter. Nothing on it changes how your SolaX system runs. |