Victron monitoring on your wall, beside VRM
RayHub is a solar display for your wall that reads your Victron system through its GX device, such as a Cerbo GX, and shows live solar, house, grid and battery power. There is no app to open and no account to make. Victron is verified in a real home that runs off grid with a Cerbo GX.
Which Victron systems RayHub reads
RayHub reads your Victron through its GX device.
| A GX device, such as a Cerbo GX | The GX device is the Victron box that brings your system's readings together. RayHub asks it for those readings over your home network, so your Victron needs a GX device for RayHub to read it. |
|---|---|
| Verified in a real home | Victron is tested and verified in a real home. That home runs off grid with a Cerbo GX, two MultiPlus-II inverters and a solar charger. If your Victron home is connected to the grid, or you are not sure your setup will work, email us at gday@rayhub.com.au with your setup. |
| Your network connection | RayHub joins your home WiFi on 2.4 GHz, and your GX device must be on that same home network, by WiFi or by cable. To find its IP address, look in your internet router's app. The finding the IP address steps are on the connect page. |
Every reading comes from your Victron's own data, passed on by the GX device, so what RayHub shows follows what your system reports. Not sure what you have? Check with your installer. For what RayHub shows, see what is RayHub.
What RayHub shows next to VRM
VRM is Victron's own monitoring portal and app. RayHub sits beside it and reads your GX device itself, on your home network.
| Live power on your wall | RayHub shows what your solar, house, grid and battery are doing right now, so you can see it as you walk past. See how home solar flows in one diagram and what your battery does across a day for how to read them. |
|---|---|
| Totals | RayHub shows today's solar, export and import totals when your GX device provides them. |
| No app, no account | RayHub talks to your GX device inside your home. If your internet drops, the live numbers keep going. See what still works when your app is down. For the other ways to watch a solar system, see the ways to monitor your solar system. |
| It only reads | Nothing on your solar display changes how your Victron system runs. Every reading comes from your system's own data, so accuracy follows your system. |
Switch Modbus on for your Victron
The setting is called Modbus TCP. It is a way for your GX device to share its numbers with other devices on your home network. It is off when the GX device is new. For what it is and why it is often off, see what is Modbus on a solar inverter.
| Step 1 | Open the GX device's menu. Use its screen, or Remote Console in VRM. |
|---|---|
| Step 2 | Go to Settings, then Services. |
| Step 3 | Switch Modbus TCP on. |
| Step 4 | Give RayHub the GX device's IP address. No port number is needed. |
Your GX device's address should stay the same, or RayHub will lose it. Ask your router to keep it, or set it on the GX device under Settings, then Connectivity, then Ethernet.
The same steps are on the connect page, with every other brand. If you would rather not do it yourself, ask your solar installer.
If RayHub does not find your Victron
Start with these checks.
| Modbus TCP is still off | A new GX device has Modbus TCP switched off. Check Settings, then Services, and switch it on. |
|---|---|
| The wrong address | Give RayHub the GX device's IP address. No port number is needed. |
| The address changed | If your router handed the GX device a new address, RayHub loses it. Ask your router to keep one address for it. |
| The same home network | RayHub joins your home WiFi on 2.4 GHz, and your GX device must be on that same home network, by WiFi or by cable. |
| Still stuck | See when something looks wrong, or ask your solar installer. |
Order your RayHub
See your Victron numbers as you walk past.
Orders are open, and we ship from December 2026. Order your RayHub.
RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See how to connect your inverter, Fronius monitoring, Sungrow monitoring or what a home energy monitor shows.
Questions
| Does RayHub work with Victron? | Yes. RayHub reads Victron through the GX device, such as a Cerbo GX. Victron is verified in a real home that runs off grid with a Cerbo GX, two MultiPlus-II inverters and a solar charger. |
|---|---|
| Can I see my Victron without opening VRM? | Yes. RayHub reads your Victron through its GX device and shows your solar, house, grid and battery power live on your wall. There is no app to open and no account to make. |
| Do I need a GX device? | Yes. RayHub reads your Victron through the GX device, such as a Cerbo GX. |
| How do I switch Modbus TCP on for my Victron? | Open the GX device's menu, on its screen or in Remote Console in VRM. Go to Settings, then Services, and switch Modbus TCP on. It is off when the GX device is new. Then give RayHub the GX device's IP address. No port number is needed. |
| How do I keep my GX device's address fixed? | Ask your router to keep its address, or set it on the GX device under Settings, then Connectivity, then Ethernet. |
| Can RayHub change my Victron settings? | No. RayHub only reads. Nothing on it changes how your Victron system runs. |