SolarEdge monitoring on your wall, beside the SolarEdge app
RayHub is a solar display for your wall that reads your SolarEdge over your home WiFi and shows what your system is doing right now. There is no app to open and no account to make. SolarEdge is tested in our workshop and has not run in a real home yet.
Which SolarEdge systems RayHub reads
SolarEdge is tested in our workshop. It has not run in a real home yet.
| Workshop tested | We have built support for SolarEdge and tested it in our workshop. It has not run in a real home yet, and the steps below have not been checked in a real home either. |
|---|---|
| A SolarEdge battery | Our testing covers SolarEdge systems without a SolarEdge battery. If you have a SolarEdge battery, email us at gday@rayhub.com.au with your inverter model before you order. We'll tell you if RayHub supports it. |
| Grid and house figures | Your SolarEdge needs a SolarEdge meter at your grid connection. |
| Your network connection | RayHub joins your home WiFi on 2.4 GHz, and your SolarEdge must be on that same home network. To find the inverter's IP address, look in SetApp or your internet router's app. The finding the IP address steps are on the connect page. |
Every reading comes from your inverter's own data, so what RayHub shows follows what your SolarEdge reports.
What RayHub shows next to the SolarEdge app
The SolarEdge app is SolarEdge's own monitoring. RayHub sits beside it and reads your inverter itself, on your home network.
| Live power on your wall | RayHub shows what your solar is doing right now, with no phone in your hand. See how home solar flows in one diagram for how to read it. |
|---|---|
| Totals | RayHub shows today's solar, export and import totals when your inverter provides them. |
| No app, no account | RayHub reads your SolarEdge inside your home. If your internet drops, the live numbers keep going. See what still works when your app is down, or the ways to monitor your solar system. |
| It only reads | Nothing on your solar display changes how your SolarEdge runs. Every reading comes from your inverter's own data, so accuracy follows your inverter. |
Switch Modbus on for your SolarEdge
The setting is called Modbus. It is a way for your inverter to share its numbers with other devices on your home network. For what it is and why it is often off, see what is Modbus on a solar inverter.
We don't have confirmed menu steps for SolarEdge yet. What follows is what we know. Check what else reads your inverter first. A SolarEdge inverter allows one Modbus connection at a time, so if another system already uses it, RayHub can't connect.
| Step 1 | Ask your solar installer to switch on Modbus TCP in SetApp, SolarEdge's setup app. It normally needs your installer. |
|---|---|
| Step 2 | Ask which port it uses. A port is like a door number on the inverter. SolarEdge often uses 1502. |
| Step 3 | Find the inverter's IP address in SetApp or your internet router's app. It is four numbers with dots. |
| Step 4 | Give RayHub the IP address. If the port is 1502, add it on the end, like 192.168.1.50:1502. |
| Step 5 | Ask your router to keep that address for the inverter. Or set it in SetApp under Site Communication, Ethernet, Edit, Static IP. |
The same notes are on the connect page, with every other brand.
If RayHub does not find your SolarEdge
Start with these checks.
| Something else reads it | A SolarEdge inverter allows one Modbus connection at a time. If another system already uses it, RayHub can't connect. Ask your installer what else is connected. |
|---|---|
| The port | If your SolarEdge uses port 1502, the address you give RayHub needs :1502 on the end. |
| You have a SolarEdge battery | Our testing covers systems without one. Email us at gday@rayhub.com.au with your inverter model. |
| The same home network | Your SolarEdge and RayHub both need to be on your home network, by WiFi or by cable. |
| The address changed | If your router handed the inverter a new address, RayHub loses it. Ask your router to keep one address for the inverter. |
| Still stuck | See when something looks wrong, or ask your solar installer. |
| Help us test | If you have a SolarEdge system and would like to help us test, email us at gday@rayhub.com.au. |
Order your RayHub
See your SolarEdge numbers as you walk past.
Orders are open, and we ship from December 2026. Order your RayHub.
RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See how to connect your inverter, Fronius monitoring, Sungrow monitoring or what a home energy monitor shows.
Questions
| Does RayHub work with SolarEdge? | SolarEdge is tested in our workshop. It has not run in a real home yet. Our testing covers SolarEdge systems without a SolarEdge battery. |
|---|---|
| Does RayHub replace the SolarEdge app? | No. RayHub is a solar display for your wall that only reads your SolarEdge. It puts your live numbers where you can see them as you walk past. |
| Can I use RayHub if I have a SolarEdge battery? | Our testing covers SolarEdge systems without a SolarEdge battery. If you have one, email us at gday@rayhub.com.au with your inverter model and we'll tell you if RayHub supports it. |
| How do I switch Modbus on for my SolarEdge? | The setting is usually called Modbus TCP, and it is set in SetApp, which normally needs your installer. Ask them to switch it on. SolarEdge often uses port 1502, so give RayHub the address with :1502 on the end. |
| What if another system already reads my SolarEdge? | A SolarEdge inverter allows one Modbus connection at a time. If another system already uses it, RayHub can't connect. Check what else reads your inverter before you order. |
| Can RayHub change my SolarEdge settings? | No. RayHub only reads your inverter. Nothing on it changes how your SolarEdge system runs. |