SMA monitoring on your wall, beside Sunny Portal

RayHub is a solar display for your wall that reads your SMA over your home WiFi and shows what your system is doing right now. There is no app to open and no account to make. SMA is tested in our workshop and has not run in a real home yet.

Which SMA inverters RayHub reads

SMA is tested in our workshop. It has not run in a real home yet.

Workshop tested

We have built support for SMA and tested it in our workshop. It has not run in a real home yet, and the steps below have not been checked in a real home either.

Sunny Boy and Sunny Tripower

The steps cover SMA Sunny Boy and Sunny Tripower inverters.

Sunny Tripower Smart Energy

The steps also cover the Sunny Tripower Smart Energy with its battery.

Grid readings

Grid readings need an SMA Energy Meter connected to your inverter.

Your network connection

RayHub joins your home WiFi on 2.4 GHz, and your SMA must be on that same home network. To find the inverter's IP address, look in your internet router's app. The finding the IP address steps are on the connect page.

Every reading comes from your inverter's own data, so what RayHub shows follows what your SMA reports.

What RayHub shows next to Sunny Portal

Sunny Portal is SMA's own monitoring. RayHub sits beside it and reads your inverter itself, on your home network.

Live power on your wall

RayHub shows what your solar is doing right now, with no phone in your hand. See how home solar flows in one diagram for how to read it.

A 10 second beat

On SMA inverters RayHub updates your numbers every 10 seconds. SMA asks for this gap to keep the inverter running smoothly. Most other brands update every second.

Totals

RayHub shows today's solar, export and import totals when your inverter provides them.

No app, no account

RayHub reads your SMA inside your home. If your internet drops, the live numbers keep going. See what still works when your app is down, or the ways to monitor your solar system.

It only reads

Nothing on your solar display changes how your SMA runs. Every reading comes from your inverter's own data, so accuracy follows your inverter.

Switch Modbus on for your SMA

The setting is called Modbus. It is a way for your inverter to share its numbers with other devices on your home network. For what it is and why it is often off, see what is Modbus on a solar inverter.

We don't have confirmed menu steps for SMA yet. What follows is what we know. The setting is in the inverter's own web page, and your installer does it.

Step 1

Ask your solar installer to open the inverter's own web page. They type its IP address into a browser, the four numbers with dots.

Step 2

They sign in as Installer.

Step 3

They switch on the Modbus TCP server.

Step 4

Give RayHub the inverter's IP address. No port number is needed.

Step 5

Ask your router to keep that address for the inverter. Or set it in SMA Connection Assist, under Change network settings.

Resetting the inverter to its factory settings switches Modbus off again. If your numbers stop after a reset, ask your installer to switch it back on.

The same notes are on the connect page, with every other brand.

If RayHub does not find your SMA

Start with these checks.

Modbus was reset

Resetting the inverter to its factory settings switches Modbus off again. Ask your installer to switch the Modbus TCP server back on.

Numbers move slowly

That is normal on SMA. RayHub updates every 10 seconds because SMA asks for the gap.

The same home network

Your SMA and RayHub both need to be on your home network, by WiFi or by cable.

The address changed

If your router handed the inverter a new address, RayHub loses it. Ask your router to keep one address for the inverter.

Still stuck

See when something looks wrong, or ask your solar installer.

Help us test

If you have an SMA system and would like to help us test, email us at gday@rayhub.com.au.

Order your RayHub

See your SMA numbers as you walk past.

Orders are open, and we ship from December 2026. Order your RayHub.

RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See how to connect your inverter, Fronius monitoring, Sungrow monitoring or what a home energy monitor shows.

Questions

Does RayHub work with SMA inverters?

SMA is tested in our workshop. It has not run in a real home yet. The steps cover SMA Sunny Boy and Sunny Tripower inverters, and the Sunny Tripower Smart Energy with its battery.

Does RayHub replace Sunny Portal?

No. RayHub is a solar display for your wall that only reads your SMA inverter. It puts your live numbers where you can see them as you walk past.

How do I switch Modbus on for my SMA?

Your installer signs in to the inverter's own web page as Installer and switches on the Modbus TCP server. Then give RayHub the inverter's IP address. No port number is needed.

Why do my SMA numbers update every 10 seconds?

SMA asks for a 10 second gap between readings to keep the inverter running smoothly, so RayHub follows it. Most other brands update every second.

My SMA numbers stopped after a reset. Why?

Resetting the inverter to its factory settings switches Modbus off again. Ask your installer to switch the Modbus TCP server back on.

Can RayHub change my SMA settings?

No. RayHub only reads your inverter. Nothing on it changes how your SMA system runs.