Growatt monitoring on your wall, beside ShinePhone

RayHub is a solar display for your wall that reads your Growatt MIN XH or MOD XH over your home WiFi and shows live solar, house, grid and battery power. There is no app to open and no account to make, and Growatt is tested in our workshop.

Which Growatt inverters RayHub reads

The MIN XH and MOD XH hybrids are tested in our workshop.

Growatt MIN XH and MOD XH, tested in our workshop

RayHub is built and tested for these hybrid inverters in our workshop. It has not run in a real home yet. If you have a Growatt hybrid and would like to help us test, email us at gday@rayhub.com.au.

Not covered yet

The second generation MIN TL-XH2 and the SPH and SPA models work differently inside. These steps don't cover them yet. Not sure which you have? Email us your model at gday@rayhub.com.au and we'll tell you.

Growatt SPF off-grid

Growatt SPF off-grid inverters aren't covered. Please don't connect RayHub to one.

Your network connection

RayHub joins your home WiFi on 2.4 GHz, and your Growatt stick or adapter must be on that same home network. The finding the IP address steps are on the connect page.

What RayHub shows next to ShinePhone

ShinePhone is Growatt's own monitoring app. RayHub sits beside it and reads your Growatt on your home network.

The Growatt WiFi stick

Most Growatt WiFi sticks only talk to the Growatt cloud app, so RayHub can't read through them. RayHub reads through a ShineWiLan-X2 stick or an adapter on your home network.

Live power on your wall

RayHub shows what your solar, house, grid and battery are doing right now, so you can see it as you walk past. See how home solar flows in one diagram for how to read them.

Totals

RayHub shows today's solar, export and import totals when your inverter provides them.

No app, no account

RayHub reads your Growatt inside your home. If your internet drops, the live numbers keep going. See what still works when your app is down.

It only reads

Nothing on your solar display changes how your Growatt runs. Every reading comes from your inverter's own data, so accuracy follows your inverter.

Connect your Growatt to RayHub

Your inverter shares its numbers over Modbus, a way for devices on your home network to read each other. Which route you take depends on your WiFi stick. For what Modbus is, see what is Modbus on a solar inverter.

We don't have confirmed menu steps for Growatt yet. The stick or adapter part is a job for your installer.

If your stick is a ShineWiLan-X2

Step 1

Check the label on your stick for X2 at the end of the name. The ShineWiLan-X2 is the one stick RayHub can read through.

Step 2

Find the stick's IP address, its number on your network. Look in your router's app for a connected device with Growatt in its name. Finding the IP address has the steps.

Step 3

Give RayHub the stick's IP address. No port number is needed.

Step 4

If nothing answers, ask your installer to check that the inverter's Modbus address is set to 1.

If your stick isn't an X2, or readings through it drop out

Step 1

Ask your installer for an RS485 to WiFi adapter, such as the Elfin EW11, wired to the inverter's RS485 port.

Step 2

Have the adapter run in Modbus TCP mode on your home WiFi.

Step 3

Give RayHub the adapter's IP address. No port number is needed.

The same steps are on the connect page, with every other brand. Whichever route you take, ask your router to keep the address fixed. Keeping the address fixed explains how.

If RayHub does not find your Growatt

Start with these checks.

The stick is not an X2

Most Growatt WiFi sticks only talk to the Growatt cloud app, so RayHub can't read through them. Use a ShineWiLan-X2, or an RS485 to WiFi adapter.

Readings through the stick drop out

Ask your installer for an RS485 to WiFi adapter in Modbus TCP mode, and give RayHub the adapter's address.

The Modbus address

Ask your installer to check the inverter's Modbus address is set to 1.

The same home network

RayHub joins your home WiFi on 2.4 GHz, and your stick or adapter must be on that same home network.

Your model

The MIN TL-XH2, SPH and SPA aren't covered yet. Growatt SPF off-grid inverters aren't covered. Please don't connect RayHub to one.

Still stuck

See when something looks wrong, or ask your solar installer.

Order your RayHub

See your Growatt numbers as you walk past.

Orders are open, and we ship from December 2026. Order your RayHub.

RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See how to connect your inverter, Sigenergy monitoring, Sungrow monitoring or what a home energy monitor shows.

Questions

Does RayHub work with Growatt inverters?

It is tested in our workshop for the MIN XH and MOD XH hybrids. They have not run in a real home yet. The MIN TL-XH2, SPH and SPA aren't covered yet.

Does RayHub work with Growatt SPF off-grid inverters?

No. Growatt SPF off-grid inverters aren't covered. Please don't connect RayHub to one.

Can I see my Growatt without opening ShinePhone?

Yes. RayHub reads your Growatt over your home WiFi and shows your solar, house, grid and battery power live on your wall. There is no app to open and no account to make.

Which Growatt WiFi stick does RayHub need?

The ShineWiLan-X2, which has X2 at the end of its name. Most other Growatt sticks only talk to the Growatt cloud app, so RayHub can't read through them.

What if my Growatt stick is not an X2?

Ask your solar installer for an RS485 to WiFi adapter, such as the Elfin EW11, set to Modbus TCP mode. Give RayHub the adapter's IP address. No port number is needed.

Do I need a port number for my Growatt?

No. Give RayHub the IP address of the X2 stick or the adapter, and nothing else.

Can RayHub change my Growatt settings?

No. RayHub only reads your inverter. Nothing on it changes how your Growatt runs.