Deye and Sunsynk monitoring on your wall, beside the Solarman app
RayHub is a solar display for your wall that reads your Deye or Sunsynk through a small gateway on your home WiFi and shows live solar, house, grid and battery power. The small WiFi stick that comes with many of these inverters is for the Solarman cloud app. RayHub can't read through it. There is no app to open and no account to make, and Deye and Sunsynk are tested in our workshop.
Which Deye and Sunsynk inverters RayHub reads
Deye and Sunsynk are the same inverter family under two names. Both are tested in our workshop.
| Deye and Sunsynk hybrids, tested in our workshop | RayHub is built and tested for these inverters in our workshop. It has not run in a real home yet. If you have a Deye or Sunsynk and would like to help us test, email us at gday@rayhub.com.au. |
|---|---|
| Single phase and three phase | The steps cover both the single phase and the three phase hybrid models. Not sure which you have? See how to tell single phase from three phase. |
| A small gateway box | These inverters share their data through a wired RS485 port, so they need a small gateway box to join your home network. Many solar installers already fit one for monitoring tools. The Elfin EW11 is one example. |
| Your network connection | RayHub joins your home WiFi on 2.4 GHz, and your gateway must be on that same home network. To find its IP address, open your internet router's app. The finding the IP address steps are on the connect page. |
The inverter turns your panels' DC into the AC your house uses, and it is where your solar numbers come from. Every reading comes from your inverter's own data, so what RayHub shows follows what your Deye or Sunsynk reports. See DC vs AC in your solar system.
What RayHub shows next to the Solarman app
The Solarman app is the cloud app your inverter's WiFi stick reports to. RayHub sits beside it and reads through the gateway instead.
| The Solarman stick | The small WiFi stick that comes with many of these inverters is for the Solarman cloud app. RayHub can't read through it. Give RayHub the gateway's address, not the stick's. |
|---|---|
| Live power on your wall | RayHub shows what your solar, house, grid and battery are doing right now, so you can see it as you walk past. See how home solar flows in one diagram for how to read them. |
| Totals | RayHub shows today's solar, export and import totals when your inverter provides them. |
| No app, no account | RayHub talks to the gateway inside your home. If your internet drops, the live numbers keep going. See what still works when your app is down. For the other ways to watch a solar system, see the ways to monitor your solar system. |
| It only reads | Nothing on your solar display changes how your Deye or Sunsynk runs. Every reading comes from your inverter's own data, so accuracy follows your inverter. |
Connect your Deye or Sunsynk with a gateway
Your inverter shares its numbers over Modbus, a way for devices on your home network to read each other. Your gateway has an IP address, which is its number on your network. For what Modbus is, see what is Modbus on a solar inverter.
We don't have confirmed menu steps for Deye and Sunsynk yet, so the gateway part is a job for your installer.
Give RayHub the gateway, not the stick
| Step 1 | Ask your installer for an RS485 to WiFi gateway, such as the Elfin EW11, wired to the inverter's RS485 port. |
|---|---|
| Step 2 | Have it join the same home WiFi as RayHub. |
| Step 3 | Find the gateway's IP address in your router's app. Look for the gateway in the list of connected devices. Ask your router to keep that address fixed, as keeping the address fixed explains. |
| Step 4 | When the gateway runs in Modbus TCP mode, give RayHub its IP address and nothing else. |
| Step 5 | When the gateway runs as a plain UDP link, add :8899 on the end of the address. RayHub reads both kinds. |
| Step 6 | If nothing answers, ask your installer to check that the inverter's Modbus address is set to 1. |
The Solarman stick that ships with many Deye and Sunsynk inverters also listens on port 8899, but over Solarman V5, which isn't Modbus. Point RayHub at the Modbus gateway instead of the stick.
The same steps are on the connect page, with every other brand.
If RayHub does not find your Deye or Sunsynk
Start with these checks.
| The address is the stick's | Check the address you gave RayHub belongs to the gateway. The Solarman stick's address won't work, because RayHub can't read through it. |
|---|---|
| The port is missing or extra | A gateway in Modbus TCP mode needs no port number. A gateway running as a plain UDP link needs :8899 on the end. |
| The Modbus address | Ask your installer to check the inverter's Modbus address is set to 1. |
| The same home network | RayHub joins your home WiFi on 2.4 GHz, and your gateway must be on that same home network. |
| The address changed | If your router handed the gateway a new address, RayHub loses it. Keeping the address fixed stops that. |
| Still stuck | See when something looks wrong, or ask your solar installer. |
Order your RayHub
See your Deye or Sunsynk numbers as you walk past.
Orders are open, and we ship from December 2026. Order your RayHub.
RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See how to connect your inverter, Fronius monitoring, Sungrow monitoring or the ways to monitor your solar system.
Questions
| Does RayHub work with Deye and Sunsynk inverters? | RayHub is built and tested in our workshop for Deye and Sunsynk single phase and three phase hybrids, and has not run in a real home yet. It needs a small RS485 to WiFi gateway fitted by your installer. |
|---|---|
| Can I see my Deye or Sunsynk without opening the Solarman app? | Yes. RayHub reads your inverter through a gateway on your home WiFi and shows your solar, house, grid and battery power live on your wall. There is no app to open and no account to make. |
| Can RayHub read through the Solarman WiFi stick? | No. The stick is for the Solarman cloud app. It also listens on port 8899, but over Solarman V5, which isn't Modbus. Give RayHub the gateway's address, not the stick's. |
| Do I need a gateway for my Deye or Sunsynk? | Yes. These inverters share their data through a wired RS485 port, so a small gateway box, such as the Elfin EW11, joins them to your home network. Ask your solar installer for one. |
| When do I add :8899 to the address? | Only when your gateway runs as a plain UDP link. Add :8899 on the end of the gateway's IP address. A gateway in Modbus TCP mode needs the IP address alone. |
| Are Deye and Sunsynk the same inverter? | They are the same inverter family under two names, and the same steps cover both. That includes the single phase and three phase hybrid models. |
| Can RayHub change my Deye or Sunsynk settings? | No. RayHub only reads your inverter. Nothing on it changes how your Deye or Sunsynk runs. |