Solar panel cleaning, and how to tell if your panels need it

Solar panels sometimes need cleaning. Rain clears a lot of dirt, and stuck-on dirt clears less. The way to know is your own numbers. Compare your live solar reading on clear days, and clean only when a drop and a look from the ground agree. Readings can mislead when your inverter is limiting output, so ask your installer if they are unclear.

What dirt does to your panels

Dirt blocks some of the sunlight your panels turn into power.

A light film

Dust and pollen settle in a thin layer that takes a little off your output on every sunny day. Rain washes much of it away, which is why a tilted panel often looks clean after a good storm.

Stuck-on patches

Bird droppings, tree sap and leaves stay put through rain. A patch over part of a panel can matter more than an even film, because one shaded or covered cell can pull down the panel it sits in.

Dry spells and the coast

In a long dry stretch dust keeps building with nothing to wash it off. Near the coast, salt in the air leaves a film of its own. Rain is less help the longer it stays away.

Not all of it is dirt

Your solar also drops from cloud, shorter days, new shade from a growing tree and a hot day, and a fault can do it too. Cleaning only helps with the dirt part, which is why it is worth checking before you pay for a clean.

How to tell if your panels need cleaning

You do not need a test kit. Compare like with like.

1. Look from the ground

Check for droppings, leaves, sap and a visible film or streaks. Stay on the ground. A look with binoculars is often enough to see what rain has not shifted.

2. Compare clear days at the same time

Pick two cloudless days a few weeks apart. At the same time of day, say midday, compare your live solar power reading. If the later day is clearly lower and nothing else changed, dirt becomes a likely cause. Use a clear day each time, because cloud changes the answer more than dirt does. Your solar can also be held down by an export limit, or by your home and battery needing little power at that moment, so a low reading is not always dirt.

3. Compare your solar total for the day

If your inverter provides it, your solar total for today is a fair way to compare whole days. Days of the same length and weather should land near each other. Days are longer in summer than winter, so compare the same time of year, not a December day with a June one. See kW vs kWh in plain words for why power and totals are different numbers.

4. Watch what rain does

Note your solar reading on a clear day before a rain event and again after, in similar sun. A step up suggests dirt that rain removed. No change suggests there was not much, or that what is there is stuck on, or that your inverter was limiting generation.

5. Rule out the other causes

Check for new shade at different times of day, and for a fault message on your inverter. If your numbers are low on clear days and your panels look clean, ask your installer to check your system before you pay for a clean. See how home solar flows in one diagram for where each reading comes from.

These checks give you a good hint. Weather, temperature and shade all move the numbers, so repeat the comparison on a second pair of days before you decide.

Cleaning solar panels safely

Use a professional cleaner for panels you cannot reach safely from the ground.

Inspect first

Look at the panels and wiring from a safe distance before you use any water. If you see cracked glass, damaged wiring or loose fittings, stop and call a licensed electrician. Do not apply water until they have repaired or replaced the damaged parts.

Stay off the roof

Do not climb onto a roof to clean panels. Falls from roofs cause serious injuries, and a clean is not worth that risk. If your panels are up high, a professional cleaner or your installer is the safer choice.

Read the maker's instructions

Check your panel maker's cleaning instructions before you start. Harsh chemicals, hard scrubbing and high-pressure water can damage panels, so follow what the maker says.

Go gentle

Plain water and a soft cloth or brush are where most people start. Panels can be hot in the middle of the day, and cold water on a hot panel is best avoided, so early morning or late afternoon is a better time to clean.

Mind the electrics

Panels are live whenever the sun is on them. Keep water away from the isolator switch, the junction box and any cabling, and leave anything electrical to a licensed electrician.

Check the result

After a clean, compare a clear-day reading with one from before. If you see no rise, your inverter may have been limiting generation on one of those days, so ask your installer to help read the numbers.

What RayHub shows you

The numbers to compare, on your wall.

Live solar power

RayHub joins your home WiFi and reads your inverter. It shows what your solar, house, grid and battery are doing right now, so a glance at midday gives you the reading to compare with another clear day.

Today's solar total

RayHub shows today's solar total when your inverter provides it, so you can compare whole days without opening an app.

Tomorrow

After it has learned your system over its first few good days, RayHub shows what tomorrow should make, such as "Tomorrow ~21 kWh". It is an estimate and it does not know whether your panels are dirty.

It only reads

Nothing on the display changes how your solar system runs, and it does not tell you your panels are dirty. Every reading comes from your inverter's own data, so accuracy follows your inverter.

Orders are open, and we ship from December 2026. Order your RayHub.

RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See the ways to monitor a solar system, a normal day of home solar, what a home energy monitor shows or how to connect your inverter.

Questions

Do solar panels need cleaning?

Sometimes. Rain washes off a lot of loose dust, so many panels do fine without help. Dirt that rain does not shift, such as bird droppings, sap, a film of dust in a dry spell or salt near the coast, can cut how much your panels make. Your own solar numbers tell you whether it is costing you anything.

How do you know if your solar panels are dirty?

Look at the panels from the ground, then compare your solar readings. Pick two clear days a few weeks apart at the same time of day and compare your solar power. If the later day is clearly lower and nothing else changed, such as new shade, dirt is a likely cause. A rain shower followed by a rise is a strong hint.

How often should you clean solar panels?

There is no one answer. It depends on how much rain you get, how dusty or salty your area is, whether trees or birds are nearby and how steeply your panels tilt. Rather than clean on a calendar, check your numbers now and then and clean when they and a look from the ground say it is worth it. Your installer or panel maker can tell you what they recommend.

Does rain clean solar panels?

Rain washes off loose dust and pollen, especially on a tilted panel. It does not reliably shift stuck-on dirt like bird droppings or sap, and a light shower can turn a dusty film into streaks. Watching your solar reading before and after rain shows you what it did.

Can you clean solar panels yourself?

Some people clean panels they can reach safely from the ground, following the panel maker's instructions. Do not climb onto a roof to do it. If your panels are on a roof, a professional cleaner or your installer is the safer choice. Before using any water, look over the panels and wiring from a safe distance. If you see cracked glass, damaged wiring or loose fittings, stop and call a licensed electrician. Check your panel maker's cleaning instructions first, because harsh chemicals, hard scrubbing and high pressure can damage panels.

Can RayHub tell me my panels are dirty?

Not by itself. RayHub shows what your solar is making right now and your solar total for today, so you can compare days. It does not diagnose dirt, shade or faults, and it only reads your inverter. The comparison is yours to make.