Hot water with solar power, and how to use your own midday sun

You can heat your hot water with solar in two different ways. One is to run an electric or heat pump hot water system on the power your rooftop panels make, ideally in the middle of the day when they are making more than your house needs. Any shortfall then comes from the grid or your battery. The other is solar thermal, where roof collectors heat the water directly from the sun and a gas or electric booster tops it up on cloudy days.

Four ways to heat water with solar

Which one suits you depends on the hot water system you already have.

A timer on your electric tank

Many homes have an electric storage tank that heats overnight. Moving its heating to the middle of the day lets it use your solar instead. Many heat pumps and some electric tanks have a built-in timer, and a licensed electrician can add a timer to many other tanks. Whether you can do it depends on your tank and on how your electricity plan treats hot water, so ask your installer or electrician. If there is not enough solar while the timer runs, your hot water uses grid power.

A solar diverter

A diverter watches how much spare solar you have and sends that power to the element in an electric storage tank, instead of letting it go out to the grid. It does not work with a heat pump. It has to be fitted by a licensed electrician, and it is worth asking your tank's maker whether a diverter suits it first.

A heat pump hot water system

A heat pump is a different kind of electric hot water system. It moves heat from the air into the water, so it uses much less electricity than a standard electric element, and it can run on your solar in the middle of the day. A heat pump with its own tank replaces your existing system, which makes it a bigger job than a timer or a diverter. Some split-system heat pumps can be connected to an existing tank instead, so ask your installer whether yours can.

Solar thermal

These are separate roof collectors that heat water directly from the sun, without turning it into electricity first. Most have a gas or electric booster for cloudy days or heavy use, and an electric booster does use household power. They are not the panels that make your electricity, and they do not show up in your inverter's readings.

RayHub can't tell you which of these to pick, and it doesn't switch your hot water. It only reads your inverter. Your installer or electrician can compare the options for your home.

For more detail, see the Australian Government's YourHome guide to hot water systems.

How to tell when you have spare solar

An electric hot water system can draw a lot of power while it heats, so it helps to know when you have spare solar to give it.

Look at midday

Check your solar, house and grid readings in the middle of a sunny day. If your solar is higher than your house, the difference is spare. It goes to your battery if you have one, out to the grid, or both.

Watch the grid reading

A grid reading showing export means you are sending power out. Check the solar, house and battery readings together first, because export can also come from a battery. If it does, heating water may draw stored battery energy instead of spare solar. See the solar power diagram for which way each arrow points.

Check it across the week

Cloud changes the answer from day to day. A hot water setup that works on a clear day may not on a grey one, which is why seeing your own numbers helps more than a rule of thumb.

Mind the kilowatts

A standard electric element is a large load for as long as it runs, while a heat pump uses much less power for the same hot water. To work out whether your panels can cover it, you need to know the difference between kW and kWh. See kW vs kWh in plain words.

Hot water, a battery and the grid

Heating water uses some of your spare solar, leaving less available to charge your battery or export.

If you have a battery

Your spare solar may be charging it in the middle of the day. Heating water at the same time means the hot water and the battery both want that power. See what your battery does across a day.

If you don't

Spare solar goes out to the grid, so heating hot water in the middle of the day is one way to use it at home instead.

Free power hours

Some households can also get free power hours through the Solar Sharer Offer. See the Solar Sharer Offer and your free power hours. It is for eligible households in New South Wales, South East Queensland and South Australia.

Smart meters

Your meter records what you import and export. It does not show what your panels make. See what your smart meter measures and misses.

Aircon

Your aircon is the other big load worth running while your panels are strong. See running your aircon on solar power.

What RayHub shows you

The numbers to look at before you change anything.

Live power

RayHub joins your home WiFi and reads your inverter. It shows what your solar, house, grid and battery are doing right now, so you can see your spare midday solar as it happens.

Totals

RayHub shows today's solar, export and import totals when your inverter provides them.

Free power hours

If your plan has free power hours, you set their start and end on your display. When they start, a green "FREE POWER" banner flashes across the top of the screen. You can set your own hot water timer to the same hours.

Tomorrow

After it has learned your system over its first few good days, RayHub shows what tomorrow should make, such as "Tomorrow ~21 kWh". Until then the corner shows tomorrow's top temperature. Actual generation can differ from the forecast.

It only reads

Nothing on the display changes how your solar system or your hot water runs. Every reading comes from your inverter's own data, so accuracy follows your inverter. We are working on support for smart home switches, so your display can turn devices on when you have spare solar.

Orders are open, and we ship from December 2026. Order your RayHub.

RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See a normal day of home solar, the ways to monitor a solar system, what a home energy monitor shows or how to connect your inverter.

Questions

Can solar panels heat your hot water?

Yes, in two different ways. Rooftop solar panels make electricity, and that electricity can run an electric or heat pump hot water system. Solar thermal collectors are a separate kind of panel that heat the water directly with sunlight, usually with a gas or electric booster for cloudy days.

What is the best time to heat hot water if you have solar?

For an electric or heat pump system, usually the middle of the day, when your panels are making more than your house is using. Heating then can use your own solar, and any shortfall comes from the grid or your battery. A timer heats on a fixed schedule whatever your solar is doing, while a diverter follows your spare solar. Your installer or electrician can tell you what your hot water system and your electricity plan allow.

What is a solar hot water diverter?

A diverter is a device that watches your spare solar and sends that power to the element in an electric storage hot water tank instead of exporting it to the grid. It does not work with heat pumps. It needs to be fitted by a licensed electrician, and it is worth asking your tank's maker whether a diverter suits it first.

Is a heat pump or a diverter better for solar hot water?

It depends on your home, your hot water system and your electricity plan. A heat pump is a different kind of hot water system, so it is usually a bigger job than adding a diverter or a timer to your existing hot water system. A diverter only works with an electric storage tank, not a heat pump. Ask your installer to compare them for your home.

How do you know if you have spare solar for hot water?

Look at your grid reading in the middle of the day. If your solar is making more than your house is using, the extra is going to your battery or out to the grid. RayHub shows your solar, house, grid and battery power live, so you can see it.

Can RayHub control my hot water?

No, not today. RayHub reads your inverter. It does not switch your hot water system or change how your solar system runs. It shows you when you have spare solar, and your hot water system is set up separately. We are working on support for smart home switches, so a tap on your display can turn a hot water element or a pump on when you have spare solar.