GoodWe monitoring on your wall, beside SEMS+
RayHub is a solar display for your wall. It reads your GoodWe on your home network and shows live solar, house, grid and battery power. There is no app to open and no account to make. GoodWe hybrids are verified in a real home.
Which GoodWe inverters RayHub reads
Hybrids are verified in a real home. MS string inverters are tested in our workshop.
| GoodWe hybrids, verified in a real home | GoodWe hybrids are tested and verified in a real home. That home has a three phase GoodWe ETA hybrid. Not sure if your home is single phase or three phase? See how to tell single phase from three phase. |
|---|---|
| GoodWe MS string inverters | These are tested in our workshop. They have not run in a real home yet. |
| Your house and grid figures | A GoodWe hybrid has its meter as part of the install. A GoodWe solar-only inverter, like the MS or DT, needs a GoodWe smart meter fitted for RayHub to read it. For how a meter fits in, see your smart meter and solar. |
| How your GoodWe joins your network | Some GoodWe inverters have a network cable or a LAN and WiFi kit. Others only have a small WiFi stick plugged into them. RayHub works with both, and the steps differ a little. Whichever you have, your inverter and RayHub need to be on the same home network. To find the IP address, see finding the IP address on the connect page. |
What RayHub shows next to the SEMS+ app
The SEMS+ app is GoodWe's own monitoring. RayHub sits beside it and reads your GoodWe itself, on your home network.
| Live power on your wall | Solar, house, grid and battery power are there on your wall at a glance. If the flows are new to you, how home solar flows in one diagram walks through them. |
|---|---|
| Totals | RayHub shows today's solar, export and import totals when your inverter provides them. |
| No app, no account | There is no account and no cloud service. If your internet drops, the live numbers keep going, as what still works when your app is down explains. |
| It only reads | Nothing on your solar display changes how your GoodWe runs. Every reading comes from your inverter's own data, so accuracy follows your inverter. |
Switch Modbus on for your GoodWe
Modbus is how a GoodWe lets other devices on your home network read its numbers. Read what is Modbus on a solar inverter if you want the background.
Pick the steps that match how your GoodWe joins your network. A port is like a door number on the inverter. RayHub uses door 502 unless you tell it another one, and a GoodWe WiFi stick needs a different door.
If your inverter has a network cable, or a LAN and WiFi kit
| Step 1 | Find the inverter's IP address in your router's device list or your GoodWe app. |
|---|---|
| Step 2 | Give RayHub that address. No port number is needed. |
| Step 3 | If nothing shows up, Modbus TCP needs switching on. It is off when the inverter is new. |
| Step 4 | On newer GoodWe inverters it is switched on in the SolarGo or SEMS+ app, under the inverter's communication settings. That usually needs the installer login, so ask your solar installer to switch it on. |
If your inverter only has a small WiFi stick plugged into it
| Step 1 | Find the WiFi stick's IP address in your router's device list. |
|---|---|
| Step 2 | Give RayHub that address with :8899 on the end, for example 192.168.1.80:8899. |
| Step 3 | This is the door GoodWe's stock Solar-WiFi stick answers on. The stick uses Modbus RTU over UDP instead of the usual Modbus TCP, and RayHub reads both. |
Keep the address fixed
| Ask your router | Routers call this a reserved address. It keeps the number from changing, which would leave RayHub looking in the wrong place. |
|---|---|
| Or set it on your GoodWe | In the SolarGo app, go to Home, Settings, then Communication Setting. On the Wi-Fi Kit or Wi-Fi Box you can also use the Solar-WiFi web page and set the DHCP mode to Static. |
These steps are also on the connect page, with every other brand. If you would rather not do it yourself, ask your solar installer.
If RayHub does not find your GoodWe
Start with these checks.
| Modbus TCP is still off | A new GoodWe has it off. Ask your solar installer to switch it on in the SolarGo or SEMS+ app, under the inverter's communication settings. |
|---|---|
| A WiFi stick without :8899 | If the only link is the small WiFi stick, the address needs :8899 on the end. Without it, RayHub knocks on the wrong door. |
| The stick is asleep or on another WiFi | RayHub's Find my inverter takes about a minute. A stick that is asleep, or sitting on a different WiFi network, won't be found. |
| A solar-only GoodWe | An MS or DT needs a GoodWe smart meter fitted for RayHub to read it. |
| The same home network | RayHub joins your home WiFi on 2.4 GHz, and your GoodWe must be on that same home network, by WiFi or by cable. |
| The address changed | If your router handed the inverter a new address, RayHub loses it. Reserve the address in your router, or set it on your GoodWe, as above. |
| Still stuck | See when something looks wrong, or ask your solar installer. |
Order your RayHub
See your GoodWe numbers as you walk past.
Orders are open, and we ship from December 2026. Order your RayHub.
RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See how to connect your inverter, what is Modbus on a solar inverter, your smart meter and solar or the ways to monitor your solar system.
Questions
| Does RayHub work with GoodWe inverters? | Yes, with GoodWe hybrids. RayHub is verified in a real home with a three phase GoodWe ETA hybrid. GoodWe MS string inverters are tested in our workshop and have not run in a real home yet. |
|---|---|
| Can I see my GoodWe without opening the SEMS+ app? | Yes. RayHub reads your GoodWe inverter on your home network and shows your solar, house, grid and battery power live on your wall. There is no app to open and no account to make. |
| Do I need the GoodWe WiFi stick? | No, not if your inverter has a network cable or a LAN and WiFi kit. Give RayHub the inverter's IP address and nothing else. If the only link is a small WiFi stick plugged into the inverter, give RayHub the stick's address with :8899 on the end. |
| How do I switch Modbus on for my GoodWe? | If nothing shows up, Modbus TCP may be off. On newer GoodWe inverters it is switched on in the SolarGo or SEMS+ app, under the inverter's communication settings. That usually needs the installer login, so ask your solar installer to switch it on. |
| Why does my GoodWe address end in :8899? | That is the door number GoodWe's WiFi stick uses. The stock Solar-WiFi stick uses Modbus RTU over UDP on port 8899 instead of the usual Modbus TCP, so RayHub needs the address and the number together. |
| Do I need a GoodWe smart meter? | A GoodWe hybrid has its meter as part of the install. A GoodWe solar-only inverter, like the MS or DT, needs a GoodWe smart meter fitted for RayHub to read it. |
| Can RayHub change my GoodWe settings? | No. RayHub only reads your inverter. Nothing on it changes how your GoodWe system runs. |