Fox ESS monitoring on your wall, beside Fox ESS Cloud

RayHub is a solar display for your wall. It reads your Fox ESS hybrid on your home network and shows live solar, house, grid and battery power. Current hybrids need a small adapter first. Fox ESS is tested in our workshop and has not run in a real home yet.

Which Fox ESS inverters RayHub reads

Current hybrids are covered. Older models are not covered yet.

KH, H3 Pro, H3 Smart and EVO

These are the current Fox ESS hybrids. We have built support for them and tested it in our workshop. They have not run in a real home yet, and the steps below have not been checked in a real home.

Older Fox ESS, such as the H1

Older models work differently inside. These steps don't cover them yet.

Why a small adapter

Fox ESS switched off readings through the inverter's network port in newer firmware. These inverters share their data through a wired RS485 port instead, so they need a small adapter fitted near the inverter to join your home network.

Your network connection

RayHub joins your home WiFi on 2.4 GHz, and the adapter must be on that same home network. The adapter's IP address is in your router's device list. See finding the IP address on the connect page.

Your inverter is where your solar numbers come from. Every reading comes from your inverter's own data, so what RayHub shows follows what your Fox ESS reports. For the basics of what it does, see DC vs AC in your solar system.

What RayHub shows next to Fox ESS Cloud

Fox ESS Cloud and the Fox ESS app are Fox ESS's own monitoring. RayHub sits beside them and reads through the adapter instead.

The Fox ESS WiFi stick

The WiFi stick that sends your data to the Fox ESS app is a separate part. RayHub reads through the adapter, so give RayHub the adapter's address and not the stick's.

Live power on your wall

Solar, house, grid and battery power update on your wall as you go about your day. See what your battery does across a day for what the battery numbers mean.

Totals

RayHub shows today's solar, export and import totals when your inverter provides them.

No app, no account

RayHub needs no account and no subscription. If your internet drops, the live numbers keep going. More in what still works when your app is down.

It only reads

Nothing on your solar display changes how your Fox ESS runs. Every reading comes from your inverter's own data, so accuracy follows your inverter.

Switch Modbus on for your Fox ESS

Modbus is a way for your inverter to share its numbers with other devices on your home network. On a Fox ESS, a small adapter does this for the inverter. What is Modbus on a solar inverter has the background.

We don't have confirmed menu steps for Fox ESS yet. This is what we know so far.

For a KH, H3 Pro, H3 Smart or EVO

Step 1

Ask your installer for an RS485 to WiFi adapter, such as the Elfin EW11. Many installers already fit one for monitoring tools.

Step 2

Your installer wires it to the inverter's RS485 port and sets it to Modbus TCP mode.

Step 3

Make sure the adapter joins your home WiFi.

Step 4

Give RayHub the adapter's IP address. No port number is needed. Give it the adapter's address, not the Fox ESS WiFi stick's.

Step 5

If nothing answers, ask your installer to check that the inverter's RS485 device ID is set to 247.

The connect page lists these steps with every other brand. The Modbus page also covers when a small adapter comes into it.

If RayHub does not find your Fox ESS

Start with these checks.

You gave RayHub the stick's address

The Fox ESS WiFi stick is for the Fox ESS app. RayHub reads through the adapter, so use the adapter's address.

The adapter is not in Modbus TCP mode

Ask your installer to check the adapter is set to Modbus TCP mode.

The device ID is not 247

Ask your installer to check that the inverter's RS485 device ID is set to 247.

An older Fox ESS

Models such as the H1 work differently inside. These steps don't cover them yet.

The same home network

RayHub joins your home WiFi on 2.4 GHz, and the adapter must be on that same home network.

The address changed

Ask your router to keep the adapter's address. If the adapter picked up a new number, RayHub would lose track of your inverter.

Still stuck

See when something looks wrong, or ask your installer. If you have a Fox ESS system and would like to help us test, email us at gday@rayhub.com.au.

Order your RayHub

See your Fox ESS numbers as you walk past.

Orders are open, and we ship from December 2026. Order your RayHub.

RayHub is made by Cody, a licensed electrician and solar installer, and Ethan, a solar enthusiast with a big love for seeing his solar data on his desk. See how to connect your inverter, what is Modbus on a solar inverter, solar battery storage or what a home energy monitor shows.

Questions

Does RayHub work with Fox ESS inverters?

RayHub is built for the current Fox ESS hybrids, the KH, H3 Pro, H3 Smart and EVO. They are tested in our workshop and have not run in a real home yet. Older models such as the H1 are not covered yet.

Can I see my Fox ESS without opening Fox ESS Cloud?

Yes, once the adapter is fitted. RayHub reads your inverter on your home network and shows your solar, house, grid and battery power live on your wall. There is no app to open and nothing to sign up for.

Why does my Fox ESS need an adapter?

Fox ESS switched off readings through the inverter's network port in newer firmware. Current hybrids share their data through a wired RS485 port instead, so a small RS485 to WiFi adapter fitted near the inverter puts those readings on your home network.

Which adapter do I need?

An RS485 to WiFi adapter set to Modbus TCP mode, such as the Elfin EW11. Many solar installers already fit one for monitoring tools, so ask yours. Give RayHub the adapter's IP address. No port number is needed.

Can RayHub read through the Fox ESS WiFi stick?

No. The WiFi stick that sends your data to the Fox ESS app is a separate part. RayHub reads through the adapter, so give RayHub the adapter's address and not the stick's.

What if nothing answers?

Ask your installer to check that the inverter's RS485 device ID is set to 247. Then check that the adapter and RayHub are on the same home network.

Can RayHub change my Fox ESS settings?

No. RayHub only reads your inverter. Nothing on it changes how your Fox ESS system runs.